The cold weather is coming, it's time to warm up your beloved daughters. A hat for a girl, knitted with knitting needles with her own hands, is the case when you can make a fashionable accessory for your little one. If you have ever held knitting needles in your hands, then this is not a problem. We have chosen the most interesting and stylish models for girls. Here are detailed descriptions with diagrams for the header and two sets.

For this stylish hat, thick yarn, peach or light brown, is best suited. Then the flower on the hat will look especially interesting. The flower is made with a size 5.5 or 6 crochet hook. A large light-colored linen button is sewn right in the middle of the flower. A master class for a cap and a flower is attached. Head circumference 48-50 cm.

To work you will need:

1. Single or circular knitting needles size 6.
2. Beige or brown thick yarn - 100 grams.
3. A little light thick yarn for the flower.
4. Needle with a large eye.
5. Button with 4 holes.
6. Crochet hook for flower.

The number of stitches you cast on should be a multiple of 6. In this work we use a 2/2 elastic band, knit stitch and purl stitch. We cast on 60 loops on circular or simple knitting needles. If you knit on simple ones, at the end you will just need to sew the side seam. To find out how many loops you need to cast on, measure the volume of the baby’s head, knit a piece of 10/10 cm. Let’s say the volume of the head is 48 cm, and in 10 cm you get 18 loops. Therefore, you need to dial: 48:10*18 =86.4. And we need the number to be divisible by 6, so we round up = 84 loops.

• Rows 1-13: knit with 2/2 rib: knit 2, purl 2. In the next row, knit as the knitting looks.
• Row 14: knit the entire row.
• Rows 15-16: purl the entire row, the second row as the knitting looks.
• Rows 17-19: knit the entire row, the second row is knitted as it looks (purl).
• Rows 20-21: purl the entire row.
• Row 22: Knit, knit together every 10th and 11th stitch. We mark these places with pins or colored thread - we will be guided by them. At the end we should have 55 loops left.
• 23-24 rows: the entire row is knitted, the second row is knitted as it looks.
• Rows 25-26: purl the entire row, the second row as the knitting looks.
• Row 27: we start decreasing the loops. Decrease 2 stitches at each mark.

We finish the work: we pull the thread through all the remaining loops and tighten it tighter. We fasten and fix. Sew the sides of the hat.

We take a large hook, for example number 6. It should be large and voluminous. Let's start crocheting a flower for a hat.

• 1st row: 2 sc in each loop = 8 loops.
• 2nd row: 2 VP (chain loops)*, SS (connecting stitch) in the next loop, 2 VP, repeat from* = 8 arches.
• 3rd row: SS in the arch*, 1 VP, 2 Dc (dc) in the arch, 1 VP, SS in the next row. arch, repeat from* along.
• 4th row: join yarn to second row. Next - knit SS in the arch* 3VP, SS in the next. arch, repeat from * = 8 arches.
• 5th row: (SBN, 1 VP, 3 SSN, 1 VP, 1 RLS) - in each arch.
• Row 6: Join yarn to row 4. We knit SS in the arch *, 4 VP, SS in the next. arch, repeat from * along = 8 arches.
• 7th row (sc, 1 ch, 5 dc, 1 ch, 1sc) - in each arch.

We finish the flower and sew on the button.

For a girl from 2 to 14 years old (diagrams). A beautiful cozy hat with an interesting pattern and a scarf from the same yarn can be knitted with your own hands on knitting needles for a child from two to fourteen years old. For a hat you will need 2 skeins of 50 grams of wool, for a scarf - 4 skeins of 50 grams. The scarf is 150 cm long. Description for girls (2-4), (6-8), (10-14) years old.

Knitting a hat

So, we are knitting a hat for a girl on knitting needles 6 and 7 mm. It is better to use wool or wool and mohair yarn. When buying yarn, run a skein over your face: the yarn should not be prickly, and the child has delicate skin. Hat pattern: 2/1 elastic band and braid pattern. Knitting needles are used either circular or regular. If you knit normally, the side seam is sewn at the end of the work.

To work you need:

1. Yarn - 100 grams (80% wool, 20% mohair).
2. Knitting needles number 6 and number 7.
3. Needle.
4. Scissors.

For the hat, cast on 54, 60, 66 stitches on needles number 6. Knit with a 2/1 elastic band: knit 2, purl 1. We knit an elastic band 5 cm high.

On the next row, add 1 stitch to each purl stitch. You should get 72, 80, 88 loops. Switch to knitting needles number 7. Knit the pattern according to the diagram for a hat up to 23, 25, 27 cm.

Next row: knit the entire row, knit 2, purl 2.

Next row: knit 2, purl 2 together, knit 2, purl 2. together, etc.

In the next row: k2, p1, k2, p1, and so on.

Next row: decrease all purl stitches.

Next row: knit the entire row.

In the next 2 rows we knit all the loops 2 together.

We pull the thread through the remaining loops, tighten and fix. Sew the side seam.

We knit the scarf on needles number 7. Cast on 30 loops. First, we knit with an elastic band: knit 2, purl 2, knit 2, purl 2, etc. We knit 5 rows with an elastic band. Next we knit the pattern according to the scarf diagram.

We end next to the arrow (inscription). Next, 5 rows with an elastic band: knit 2, purl 2, knit 2, purl 2, etc. Cast off the loops.

Based on the American cap, we will knit a hat with ears. This hat can be decorated with a flower and pom-poms in a contrasting color. Knitting density: 11 loops = 10 cm.

This knitted hat is made of thick yarn with knitting needles size 47-48.

To work you will need:

1. Thick yarn - wool or wool with acrylic - 100 grams (60 m/100g).
2. Circular knitting needles 8 mm thick. The length of the knitting needles is 40 cm.
3. Simple knitting needles 5 mm thick for finishing with cord.
4. The needle is big.

We cast on 8 mm circular needles, cast on 3 loops and knit according to the “Left eye” pattern from the 1st to the 8th row. Cut the thread. We cast on 3 loops and knit according to the “Right ear” pattern from the 1st to the 8th row. We do not cut the thread. We remove the loops from the right and left ears onto a pin or any knitting needle and put it aside. We will add them in the future.

We knit the main part of the hat

We start from the front side of the hat, knitting according to the “Ear Connection” pattern. In the end, we should have 54 loops of the main fabric.

• We cast on the knitting needles 14 loops of the “right eye”,
• Cast on 7 stitches for the back of the hat.
• Cast on 14 left eye loops. It turned out to be 35 loops.
• Next, knit according to the pattern (k4, p3, k7, p7), and then follow the pattern for 35 stitches.
• Turn the knitting over.
• In the purl row of the pattern we knit, marking the 18th loop with a colored thread - this is the middle. We tie the row.
• Cut the thread.
• Transfer 18 stitches (including the center one) to the right needle.
• Attach the thread and knit 17 stitches (left eye)
• We put 19 loops on the knitting needles, connect the row into a circle, and knit to the marker. We should have 54 loops - the volume of our hat. Check the symmetry of the cap.

Children's hats, scarves and mittens, knitted or crocheted

Now, if there’s anything worth learning to knit for, it’s to knit a hat for your child. Today in children's clothing stores you are unlikely to find a knitted hat containing 100% baby cashmere or alpaca wool. In the best case, you will get a hat made of half-wool (50% wool and 50% acrylic). But knitting a baby hat with knitting needles or crochet is not at all that difficult; just basic knitting skills, a little patience and inspiration are enough.

Knitting patterns for children's hats are mostly universal, and to knit a hat for a girl you need to choose yarn in light or variegated shades, and if you are knitting a hat for a boy, then give preference to calmer tones. Also don’t forget to add a hat and knit or crochet a children’s scarf. Knitting a baby scarf will take you several hours, and as a result you will get a warm and cozy thing for your child.

Well, what would a walk be without warm mittens? Knitting mittens for a child will require a little more time and patience, but on the Kolibri website you will find detailed descriptions of how to knit mittens, as well as patterns for knitting mittens and ideas for implementing various models.

An original youth hat with a large pompom will appeal to young girls who like to attract attention with interesting additions to the main image. You can pair it with a lemon or light green scarf, which will add a touch of completeness to the look. Wool and acrylic threads are selected for this model in a ratio of 1 to 1. In addition to aesthetic functions...

A universal and incredibly simple model of a knitted shirt front that will look equally good on both a three-year-old child and a girl of eight years old. This convenient item has several important advantages: Ease of manufacture. You make the front and back halves separately, and then simply connect them together. Convenience for the child himself; ...

Do you want to give your child an original and useful gift? Even if you haven’t knitted anything for a long time, this shirtfront is so simple that you can easily cope with the task. The beautiful color of the yarn will certainly please the girl. And if not, you can always choose a material of a different shade for knitting. It doesn't matter at all. Dickey...

A hat for a little fashionista is knitted from emerald-colored yarn. The hat is knitted with the “Leaves” pattern, it turns out to be light and openwork, so it is not suitable for cold weather, but for warm autumn or late spring it will be very useful in a baby’s wardrobe. The description is given for a two-year-old girl. To knit this hat, it is better to choose...

Children's set of snood and warm knitted hat. A simple knitting pattern is quite accessible even to beginners. So you should try it. Firstly, it’s a great experience, and secondly, there’s nothing complicated, and the material costs are minimal. For this kit you will need to purchase green yarn from your local craft store...

A charming set for a little fashionista consisting of a hat and scarf will definitely please your princess. After all, wearing such accessories, she will definitely not go unnoticed by her friends. However, if you wish to change the yarn, select it with caution. After all, it is extremely important to choose one that will not inject the baby later. A good option might be...

I bring to your attention an original children's set, consisting of a warm hat with an original pattern and a cute scarf-collar. You have already seen this model of scarves more than once in the form of adult models, which are known as snood. This is a very comfortable thing that protects your neck from cold and wind. In addition, such an item of clothing looks very...

You can knit a hat for a little girl using knitting needles with your own hands. There are a large number of schemes of varying complexity. Each needlewoman can choose a pattern suitable for her skill level.

To make a product, you need to select yarn and purchase knitting needles that match it. All this is available in specialized stores. There are patterns for knitting hats on 2 and 5 knitting needles. Before purchasing materials, you need to study the instructions; they usually indicate the number of working knitting needles and the type of yarn.

The patterns are designed for a certain thread thickness. If you take thinner or too thick yarn, the product will turn out to be a different size.

Yarn selection

Threads for knitting a hat are selected depending on its purpose. The summer headdress is woven from cotton iris and linen. For a winter hat you will need wool or its synthetic analogues. Manufacturers indicate the composition of the yarn on the packaging.

A children's product can be knitted from the following types of threads:

• Wool yarn. Suitable for making warm clothes. Natural wool is very warm, looks beautiful, but quickly loses its shape and appearance. The most expensive types of wool yarn are angora, cashmere, mohair, alpaca.

• Blended yarn. Wool with the addition of acrylic retains the best qualities of natural fiber, and synthetics give it wear resistance.
• Acrylic. Synthetic fiber is almost never used in its pure form. Blended types of yarn are made from it. Products containing more than 50% acrylic do not absorb moisture well, become highly electrified, and look cheap.
• Linen, silk, cotton. Threads made from natural fibers are suitable for making summer clothing. They have good hygroscopicity and do not cause allergic reactions.
• Bamboo. Threads made from this fiber have antimicrobial properties. The yarn does not cause allergies. Things made from bamboo do not deform and absorb moisture well.

The choice of yarn quality and color depends on the design of the product. For a multi-color hat consisting of identical segments, you will have to purchase several skeins of thread. The remaining yarn will make a scarf and gloves. If the pattern is created by changing threads, take yarn of the same type with the same thickness, but different colors.

This is the only way to obtain a product with the same fabric density. Downy items are often knitted in two threads, one of thin cotton and the other of animal underfur.

Calculation of the amount of yarn

The knitting pattern usually comes with detailed instructions. Often magazines publish only a drawing and an image of a hat for girls. In such cases, you will have to do the calculation of the amount of thread yourself. To do this, you need to knit a small sample according to the pattern from the manual.

Each package contains two numbers separated by a fraction, for example 15/6, 32/2. The first number before the line indicates the volume of yarn. The second number indicates the number of strands that make up the thread. Bulky yarn with a small number of twists consumes less.

1. Make a drawing of the finished product, observing the actual dimensions;
2. Choose yarn in the store;
3. Write down the data from the skein packaging;
4. From a thread with the same volume and number of twists, knit a sample of 10 cm by 10 cm;
5. Count the number of loops in the first row;
6. Unravel the knitting and measure the length of the used thread;
7. The area of ​​the finished product is calculated according to the drawing, then divided by 10 square meters. cm.;
8. the result obtained is multiplied by the amount spent on the thread sample;
9. The yardage is checked against the data on the yarn label.

If one skein contains 200 m of thread, and the product requires 350 m, then you need to buy two packages. The greatest expense is for products knitted with braids.

The least number of threads is spent on openwork designs. Any knitted item loses up to 10% in volume after washing, so it is recommended to take more yarn than indicated in the recommendation. It should be taken into account that natural wool shrinks if it is soaked in hot water.

Important. Yarn that has been decated a second time will not shrink after the product is ready.

Before you start working with any wool, you need to soak it in warm water.

Knitting needle selection

The density of a knitted fabric depends on the thickness of the yarn and knitting needles. The manuals included with the diagrams indicate the dimensions of materials and tools. For craftswomen who knit tight stitches, it is better to take knitting needles one number thicker than the recommended ones.

An approximate table for selecting knitting needles depending on the thickness of the yarn:

Knitting needles differ in their purpose, they are:

• circular;
• stockings;
• straight;
• elongated.

For knitting hats, you usually use circular or stocking needles. The fishing line and the working part of the tool differ not only in thickness, but also in length. For knitting a small baby hat, circular knitting needles with fishing line up to 50 cm are suitable.

Knitting tools are made of metal, bone, wood, and plastic. Metal knitting needles have a smooth surface; woolen threads glide along them well. A wooden instrument weighs less and can be taken with you on a trip.

Patterns and step-by-step descriptions of knitting hats for girls

Knitted hats for girls (pattern patterns, which are very diverse, should be carefully studied before starting work) are best knitted simple, which do not require much time to make. A novice craftswoman should not take on the production of a product of increased complexity. A beautiful children's item can be created using bright, voluminous threads.

Winter hat with earflaps with a simple pattern

A classic Russian headdress with ears, designed for the cold season. Knitting is done in two threads. They can be the same color or two different tones. The product is intended for a child 7 years old. Size chart for children from 0 to 9 years old.

Materials and tools:

• 100 g of any natural wool yarn (300m in 100 g);
• Knitting needles number 5.

Abbreviations used:

• ISP - purl loop;
• LP – facial loop;
• LPPR-facial, crossed from a broach.

Description of the work progress:

Attention. The pattern of the back of the product is knitted according to the pattern:

1. Having knitted 3 cm from the first row of the back, cast on 21 loops in front, and close the knitting into a solid circle.
2. The work continues in a circle.
3. After 4.5 cm, change the pattern to the front surface.
4. Knit with stockinette stitch up without adding 7.5 cm.
5. They switch to decreasing. To do this, all loops are divided into six parts, each border loop is marked with a contrasting thread.
6. Every 2 loops are knitted together.
7. Continue decreasing until there are 6 stitches left on the knitting needles.
8. The last 6 loops are collected onto one thread, tightened, and the knot is brought out to the wrong side of the product.
9. Ribbons are sewn to the ears.

A hat for the cold season can be made double. The back part is knitted in the same way as the front part, then they are sewn together. The reverse side can be sewn from fleece. Dimensions for tailoring are taken from the finished product.

Hat for newborn

Knitted hats for girls (patterns of interesting models are offered by many thematic publications) are made from beautiful yarn, decorated with lace, knitted flowers, and berries. The appearance of the finished product depends on the imagination of the needlewoman. The more decorative elements, the simpler the knitting pattern should be. A baby hat can be knitted in a few hours.

To do this you will need materials and tools:

• straight knitting needles;
• a set of five identical knitting needles;
• 50 g white yarn (blend yarn containing acrylic and wool);
• small balls of colored threads for finishing (brown, orange, yellow)

Description of work:

1. the product begins to be knitted with orange thread, 19 loops are strung on each of 4 stocking needles;
2. knit 3 cm upward with a regular elastic band (alternate 1 L.P., 1 I.P.);
3. change the thread to white;
4. knit 11 cm in stockinette stitch (all stitches in rows LP);
5. change the thread again, knit 1 row with orange yarn;
6. the top loops are closed;
7. the product is folded together, sewn over the edge along the top edge;

The hat is ready. Now all that remains is to decorate it with decorative elements. These can be two small pompoms, an applique or crocheted flowers. You can decorate a hat for a newborn girl with embroidery. The simplest trim is knitted on knitting needles. The maximum possible number of loops is cast on with yellow thread. LP 1-2 rows are knitted. The loops are closed to the end of the row.

The resulting ribbon is wound on a piece of cardboard with dimensions of 4 by 5 cm. A thread is passed under the wound rows. Both ends are connected and the knot is tightened. The bun is removed from the pattern and sewn instead of a bubo to one of the two sharp ears of the cap. The same decorative element is made from brown yarn.

The finishing details can be crocheted.

Summer openwork hat

Knitted hats for girls, patterns of hats for the warm season, are offered in large quantities by knitting magazines. They are made from individual elements or knitted as a single piece in the round on stocking needles.

Before you begin, you need to take two measurements from the child’s head:

• circle;
• distance from the middle of the ear to the crown.

After this, you need to knit a sample of the pattern, and calculate the number of loops and thread consumption. In the “Wave” pattern, the pattern repeats every 3.5 cm. This means that for a two-year-old girl with a head circumference of 46 cm, 13 repeats will be required.

Each pattern repeat requires 8 stitches. The length of the first row will be: 13 repeats multiplied by 8 + 2 edge loops and 1 loop for lifting the row = 107 loops.

Important. The elastic band of the cap should not squeeze the child's head.

The knitted first rows must be tried on; if the first 5 cm are too tight, the product is unraveled and work begins again, taking into account adjustments for looseness of fit.

To make a hat you will need materials and tools:

• 50 g of green mixed yarn (45-50% cotton, the rest polyamide, acrylic);
• knitting needles No. 2, 3-3;
• hook for assembling the product.

Garter stitch pattern:

Progress:

Spring hat

The demi-season headdress is knitted from thin woolen threads. For a spring hat, use medium density yarn. Otherwise, the work is carried out according to the same schemes as when creating warm winter clothes. The simplest model of a spring hat with ears.

It is knitted in the round, without dropping stitches. It takes several hours to make such a headdress. The model is suitable for girls from 2 to 14 years old.

The pattern of the main fabric can be knitted according to any of the patterns that do not involve reducing the number of loops towards the crown.

Any pattern designed for knitting pullovers and scarves is suitable. The fabric of the hat can be knitted from square elements.

This is done like this:

1. Cast on the required number of stitches on circular needles. Their number must be a multiple of 6 or any other number; the craftswoman chooses the number of loops in one square herself.
2. Several rows of regular elastic are knitted.
3. If there are 120 loops in a row, then further knitting is carried out according to the pattern 6IP, 6LP.
4. The pattern is repeated 6 times, then knitting is done in a checkerboard pattern. Above the LP, IPs are tied.
5. The pattern is repeated again 6 times, then the IP is knitted over the LP again.
6. The fabric is knitted to the desired height of the product, but so that the pattern ends in a complete square.
7. The last row is closed;
8. The hat is folded in half and sewn along the top edge.

A spring headdress can be assembled from individual colored squares. To do this, knit the required number of identical elements from threads of different tones. The squares are sewn all together, an elastic band is tied to the bottom edge.

Beret for children

Knitted hats for girls (patterns for models of children's hats can be found for every taste) often have a similar shape and appearance. The beret is different from any other hats.

Brief description of the work progress:

1. the child’s measurements are taken;
2. cast on the required number of loops;
3. knit several rows of elastic;
4. begin to knit rows with a sharp increase in the number of loops;
5. when the desired diameter is reached, they begin to knit rows for reduction;
6. The last 6 loops are pulled together with thread;
7. the knot is brought out to the wrong side of the product.

You can start knitting berets not from the elastic band, but from the top of the head. The work is done exactly the same, only in reverse order. The finished product can be decorated with pompoms and embroidery. Even a novice needlewoman can knit a simple beret model with her own hands.

The work is carried out in the following sequence:

1. cast on 130 stitches on circular knitting needles;
2. knit 5 cm upward with a regular elastic band;
3. the loops are divided into 7 equal parts;
4. a row is knitted with IP, and at the border of each segment three LPs are knitted;
5. in the next row, 5 LPs are knitted into each LP, and 1 PI into each LP of the previous row;
6. the product is knitted to the required diameter according to the diagram;
7. start decreasing by knitting 5 LPs in one loop;
8. after this, the number of IPs is reduced to a minimum;
9. when there are 10 loops left on the knitting needles, they are collected on a hook and everyone pulls the thread through;
10. the thread is pulled into a knot;
11. The finished beret is decorated with beads, knitted flowers, and bugles.

Important. Circular knitting is knitted only in LP.

Knitting does not move from left to right, but is carried out rising in a spiral in one direction.

Beret for a 2 year old girl with a relief pattern:

The product is knitted on circular needles. All work is carried out in compliance with the usual stages of making a beret.

The relief pattern is knitted according to the pattern:

Beret with braids for a girl 5-6 years old:

After the hat is knitted to the desired height, begin to reduce the number of loops. Finish knitting by decreasing purl stitches. In the new row, three IPs are knitted into one. Then reduce the number of loops in the pattern by knitting 2 stitches per stitch. The remaining loops are collected on the hook, and the working thread is pulled through them all at once. Tie a knot. The crown is decorated with a bubo.

Knitting patterns differ from each other in different levels of complexity.

Any needlewoman can easily find samples of a knitted cap suitable for her level of skill for a little girl. Children's clothes are knitted quickly due to the small size of the products. They require little yarn, and ready-made hats and scarves for babies in stores are expensive. Therefore, the hobby of knitting brings not only pleasure, but also economic benefits.

Article format: Anna Vinnitskaya

Video about the pattern of knitting hats for girls

A hat with a fold that forms ears and a detachable snood:

Dear mothers-handicraftsmen and those who are just beginning to get acquainted with the art of knitting. In this article we will look at the most popular models of knitted hats, both crocheted and knitted. Schemes and detailed photographs will help you knit attractive hats for your little ones. So, let's begin…

The main thing in the article

Knitted hats for girls: fashion trends

Children's fashion today offers many interesting ideas for designing a knitted hat for a girl. Let's look at the most trendy models that will be fashionable this year.

Toy hat. Such a hat can be made in the form of a cartoon character or some kind of animal. They are worn by both the smallest representatives of the fair half of humanity and teenage girls. The original thing is quite simple to make. A little imagination, and an exclusive model will adorn your princess.


Hat with pompom. For older girls this is a great option. Large pom-poms have been at the peak of popularity for several years now and are not going to lose their position. They can be at the top, at the very base of the cap. There can be two or even three pom-poms.

Hat with ears. It was also loved by both the youngest and already quite old girls. Even adult girls are happy to try on this model. “Cool” ears can be either triangular or round.


Helmet. Lately, the practical helmet hat has become increasingly popular. If in the late 80s - early 90s such hats were worn mainly by boys, now modern needlewomen have skillfully adapted them for girls.

Ushanka. A warm option for both little ones and school-age girls. This is a fashion accessory that both little fashionistas and their parents like.

Crochet hats for girls: interesting ideas

There are many ideas for knitting hats and their photos can be seen below. We will describe knitting the base for any type of hat. The photo shows a white base.

For a hat with a volume of 42 cm you will need:

• The thread is white, with an approximate content of 50% acrylic and 50% wool.
• Hook No. 3.

The crocheted base is ready. Now, having the main part of the accessory, you can show your imagination and make an exclusive model of the cap. You can see some interesting ideas for creating a hat below.

Schemes of beautiful hats for girls

A girl will always be her mother’s princess, so we offer designs for the most beautiful hats for little princesses.

Hat with a cat. Autumn version, knitted with knitting needles, with a knitting pattern.



Toy tiger hat. Knitting pattern for base and decor.




Bear toy hat. Made with crochet.






Knitted fox hat with a pattern for knitting a muzzle.

Knitted hat for a girl for autumn: crocheted and knitting options

We crochet a red cap for a girl.

The description is for a hat measuring 35 cm. The following materials will be needed:

• Red thread-grass (100% polyester). We knit the base from it. For orientation, the skein should be 150 m per 100 g.
• White, black and gray threads for decoration. In a skein of 100 g – 350 m.
• Hook No. 3 for knitting the warp.
• Hook No. 2 for decoration.

We knit the base of the hat according to the description.

Now let's make a face.



We collect the hat.

Knitting a hat with knitting needles

Description of the model.

Now let's make the ears.

Crochet summer hats for girls with photos and patterns

There are many options for summer hats. We have selected the most interesting options with diagrams for you.

Summer orange crochet hat. Knitting pattern for a summer headdress.



Summer hat for girls. Hook pattern.



Cap with "Bear" pattern, crochet



Yellow hat for a little girl.

DIY winter hats for girls

We suggest knitting a beautiful hat for your baby. In this case, you won’t have to agonize over the work for a long time.

To work you will need:

• Knitting needles No. 3 or No. 4 (depending on the yarn used).
• Thread of the main color (choose any one you like) and black thread for knitting decor.

Hats with ears for girls: photos

Crochet and knit a hat for a newborn girl

Master class on an elegant crochet cap for a newborn girl.

You will need for knitting:

• White yarn (100% cotton) – 50 g.
• Pink yarn for tying.
• Hook No. 2.

Cast on 10 chain stitches. Make a ring out of them. We tie the air loops st. s n. There should be 16 of them. Next we knit in circular rows:

• 1p – we knit two stitches from one stitch, for a total of 32 stitches. s n.
• 2p - the same as 1p.
• 3p - make 2 tbsp. s n. from one column through two.
• 4p – 2 tbsp. s n. from one loop already every 3 loops.
• 5p - through 4 loops.
• 6p - through 5 loops.

Raise 5 air loops up and connect them to the circle, through 4 loops of the circle. Tie in a circle.


Next we knit according to the pattern.


The first row of the openwork pattern is ready.


Now we knit it 3 more rows, turning the knitting over each time.


Tie the same openwork around the back of the occipital circle. Indicated by an arrow in the photo.


Tie the back edges of the lace and the front edges with pink thread. This is done Art. without n.


We attach a satin ribbon and the cap is ready.

We knit a beautiful hat with a bow for a newborn girl.

For knitting you will need:

• Yarn of the main color.
• Yarn for bow.
• Knitting needles No. 3

1. Cast on 44 loops. Knit 5 rows (1 cm) with an elastic band.
2. Next, stockinette stitch 4 rows. Insert a thread of a different color and knit 4 rows with it.
3. We return the main color yarn to work and knit 5–7 cm from the start of work (depending on the thickness of the yarn).
4. Making a reduction (rowing):

• 1p – knit 2 loops together, knit two.
• 2p – purl.
• 3p – 2 loops together through one knit stitch.
• 4p – purl.
• 5p – all 2 together.
• 6p – purl.

Pull the working thread through the loops remaining on the knitting needle and tighten.

Bow: Cast on 16 loops with colored thread. Knit 1 cm. Sew in the middle to make a bow.

Sew the bow onto the hat, securing its ends. Sew the main seam and the hat with bow is ready.

Knitted hats-toys with descriptions and photos

Panda toy hat for a school-age girl.

You will need:

• Thread of the main color - 100 g (ratio 70/30 cotton and viscose).
• For decoration, threads are black and white. The composition is preferably the same as the base.

The description is given for size 50.

Hat-toy Lamb.

You will need:

• Yarn terry or pouf. White with colored blouses – 70 g. 50 g – 45 m (70/30 cotton and viscose).
• Regular yarn for ears - 10 g. It is advisable to match the color of the inclusions on the main thread, then it will look more harmonious.
• Hook No. 3–3.5

Video master classes on knitting hats for girls

In order to knit a bright and original hat with a flirty bow for a 4-5 year old girl required:

• 75–90 g orange and 25–30 g white YarnArt Baby yarn (150 m/50 g, 100% acrylic)
• and knitting needles No. 4.

Pattern 1. Elastic band 1x1: knit rows – k1, purl 1; purl rows - according to the drawing.
Pattern 2. Front stitch: front rows - with front loops, purl rows - according to the pattern.
Pattern 3. “Rice”: front rows – k1, p1, finish with k1; purl rows – purl 1, knit 1, finish purl 1.
Loop calculation: 2 p x 1 cm horizontally.

Cap.

Cast on 79 stitches with orange yarn on size 4 needles.


Knit 6 rows (2 cm) with pattern 1.


This will be the headband of the cap. The width in an unstretched state should be 30-31 cm.


Next go to pattern 2.


Knit 8 rows (3 cm).


From the right edge of the fabric, tie an additional white thread to the working thread. Work 1 row of faces with it. loops.


Starting from the next (purl) row, go to pattern 3. Make 4 rows. At the end of each purl. row, knit the edge loop with threads of two colors: orange and white. Then knit 1 row with purl stitches, cut off the white yarn and secure it.


Next, continue the work with orange yarn, pattern 2.


Knit 12 rows (4 cm) in an even fabric.


Then you need to start shaping the bottom of the cap. To do this, not counting the first two loops, divide the loops on the knitting needle into 7 equal parts.
79 – 2 = 77 p
77: 7 = 11 p
You will get 7 wedges of 11 stitches each. At the beginning of each of them, knit 2 stitches together with a tilt to the left (behind the back walls).


Next, perform decreases in faces. rows, knitting the first 2 sts of each wedge together until there are 23 sts left on the needles.


Transfer them to a long hook, cut the working thread, pull it through all the loops and pull tight.


Sew the edges of the cap with a vertical knit stitch. To do this, from the front side of the fabric, insert the hook into the horizontal broaches of two loops located next to the right edge. Pull the thread through them. Then insert the hook into the same broaches of two loops located next to the left edge. Sew the product in this way and secure the end of the thread.

The knitted hat is ready. But you also need to tie a bow that will serve as decoration.

Bow.

Cast on 16 sts with white yarn on size 4 needles.


Knit 46 rows with pattern 3 and bind off all stitches.


Fold the resulting rectangle into the shape of a bow. Wrap yarn around it in the middle, imitating a knot.


Then sew the resulting bow to the white stripe on the knitted hat. Hide the ends of the cut yarn on the wrong side of the hat.