The idea for the hat was found on the Internet without a description, so all the calculations and diagrams were made and found independently. The Butterfly pattern is more suitable for girls, but it can be easily replaced. The description contains a schematic structure of this helmet.
Having studied a dozen helmet hats on the Internet, their types and knitting methods, I chose for myself, as usual, the simplest option: the hat is knitted almost in one piece with one seam.

Materials used:

Amico bobbin yarn, 100% merino wool, 125m/50g, consumption 150-160g.
Circular knitting needles No. 2.5, No. 3 and No. 3.5, needle, elastic thread (optional), hook without handle.
The hat is knitted in several stages. Rotary and circular knitting is used.
Size 2-4 years (head circumference 50-52 cm). The height of the cap from the elastic band of the neck is 20.5 cm.
Knitting density:
1 cm - 2.7 loops
1 cm - 5.8 rows

Description:

Knitting starts from the neckline. On an auxiliary thread using 3mm knitting needles, cast on 110 stitches, join the knitting in a circle and knit 1-2 rows with knit stitches, switch to the main color thread and knit 1-2 rows with knit stitches (to make it easier to pick up loops from the auxiliary thread), then 5 cm (20 rows) with an elastic band of 1 person. on 1 purl.

Add 20 stitches evenly from the broach: (5l, increase, 6l, increase) x 10 times. Total 130 loops.

Switch to 3.5 mm needles and knit 5 rows with knit stitches. In the next row, bind off 33 loops for the oval of the face, then through the row (in the front rows) decrease four more times, 1 loop at the beginning and at the end of the row. A total of 41 loops are closed for the oval of the face. There are 89 stitches left on the needles.

The repeat of the butterfly pattern is 10 loops and 10 rows, the repeat of the butterfly is 5 loops and 5 knits. loops alternate in a checkerboard pattern.

Verbal description:
1) persons. row: close 33p, 1k, 5k, (5 butterfly, 5k)x8 times, 5 butterfly, 5k, 1k.
After the first row, turning knitting begins.
2) purl. row: 1k, 95i, 1k
3) 1k, 2vl, 3l, (5 butterfly, 5l)x8 times, 5 butterfly, 3l, 2vlp, 1k
4) 1k, 93i, 1k
5) 1k, 2vl, 2l, (5 butterfly, 5l)x8 times, 5 butterfly, 3l, 2vlp, 1k
6) 1l, 91i, 1k
7) 1k, 2vl, 1l, (5 butterfly, 5l)x8 times, 5 butterfly, 1l, 2vlp, 1k
8) 1k, 89i, 1k
9) 1k, 2vl, (5 butterfly, 5l)x8 times, 5 butterfly, 2vlp, 1k
10) 1k, 1i, (knit a butterfly, 5k)x8 times, knit a butterfly, 1i, 1k

P.S.: experience has shown that it is better to knit 4 repeats in height.

11, 13, 15, 17, 19) 1k, 1l, (5l, 5 butterfly)x8 times, 6l, 1k
12, 14,16, 18) 1k, 87i, 1k
20) 1k, 1i, (5i, tie a butterfly)x8 times, 6i, 1k

21, 23, 25, 27, 29) 1k, 1l, (5 butterfly, 5l)x8 times, 5 butterfly, 1l, 1k
22, 24, 26, 28) 1k, 87i, 1k
30) 1k, 1i, (knit a butterfly, 5k)x8 times, knit a butterfly, 1i, 1k
31, 33, 35, 37, 39) 1k, 1l, (5l, 5 butterfly)x8 times, 6l, 1k
32, 34, 36, 38) 1k, 87i, 1k
40) 1k, 1i, (5i, tie a butterfly)x8 times, 6i, 1k

Then, 4 times in the front rows, add 1 loop from the broach at the beginning and at the end of the row (2 loops in total per row), not forgetting to knit the main pattern. Total 97 loops.
41) 1k, increase, 1l, (5 butterfly, 5l)x8 times, 5 butterfly, 1l, increase, 1k
42) 1l, 89i, 1l
43) 1k, increase, 2l, (5 butterfly, 5l)x8 times, 5 butterfly, 2l, increase, 1k
44) 1k, 91i, 1k
45) 1k, increase, 3l, (5 butterfly, 5l)x8 times, 5 butterfly, 3l, increase, 1k
46) 1k, 93i, 1k
47) 1l, increase, 4l, (5 butterfly, 5l)x8 times, 5 butterfly, 4l, increase, 1k
48) 1l, 95i, 1k
49) 1l, 5l, (5 butterfly, 5l)x8 times, 5 butterfly, 5l, turn the work inside out towards you and pick up 33 loops from left to right. Next knit in the round.
50) The row is knitted on the front side, but is purl. 6l, (knit a butterfly, 5l) x 8 times, knit a butterfly, 6l, 33l + 1l loop of the next row. The beginning of the row has shifted 1 stitch to the left.

How to knit a butterfly in circular knitting:
2 knit stitches, then insert the right knitting needle under the broaches from bottom to top, then into the knit stitch from left to right (as when knitting a knit stitch) and knit the broaches from the knit stitch together to make 1 knit stitch, 2 knit stitches.

P.S.: based on the instructions above, you need to knit 2 repeats in height.

51, 53, 55, 57.59) (5 butterfly, 5l) x 13 times
52, 54, 56, 58) 130l
60) (knit a butterfly, 5l) x 13 times

61, 63, 65,67,69) (5l, 5 butterfly) x 13 times
62, 64, 66,68) 130l
70) (knit a butterfly, 5l) x 13 times

71, 73, 75, 77, 79) (5 butterfly, 5l) x 13 times
72, 74, 76, 78) 130l
80) (knit a butterfly, 5l) x 13 times

Formation of the crown

Verbal description:
81, 83, 85) (5l, 5 butterfly) x 13 times
82, 84) 130l
86) (5l, 2vl, 3l) x 13 times = 117p.
87) (5l, 4 butterflies)x13 times
88) (5l, 2vl, 2l) x 13 times = 104p.
89) (5l, 3 butterflies)x13 times
90) (5l, knit a butterfly from three loops)x13 times

91, 93, 95) (5 butterfly, 3l)x13 times
92, 94) 104l
96) (2vl, 6l)x13 times = 91p.
97) (4 butterfly, 3l)x13 times
98) (2vl, 5l) x 13 times = 78p.
99) (3 butterfly, 3l)x13 times
100) (knit a butterfly from three loops, 3l)x13 times

101) (1l, 2vlp, 3l)x13 times = 65p.
102) 65l
103) (1l, 2vlp, 2l)x13 times = 52p.
104) 52l
105) (1l, 2vlp, 1l)x13 times = 39p.
106)39l
107) (1l, 2vlp) x13 times = 26p.
108) 26p
109) 1l, (2vlp) x 12 times, slip 1 knit stitch from the left knitting needle to the right one and knit 2vlp.

Pull off the remaining 13 stitches.
The height of the decreases is 6 cm.

Bottom of the helmet

Carefully unravel the auxiliary thread and pick up 110 stitches.
For the shirtfront, you can use any pattern and pattern or knit with raglan. I took a simple diagram of leaves.
Pattern repeat at the beginning of 10 loops: 5l, 5i. There are 11 rapports in total.

Verbal description:
1) (5l, 5i)x11 times
2) all even rows are knitted according to the pattern
3) (2l, yarn over, 1l, yarn over, 2l, 5i)x11 times = 132p.
5) (7l, 5i)x11 times
7) (3l, yarn over, 1l, yarn over, 3l, 5i)x11 times = 154p.
9) (9l, 5i)x11 times
11) (4l, yarn over, 1l, yarn over, 4l, 5i)x11 times = 176p.
13) (11l, 5i)x11 times
15) (5l, yarn over, 1i, yarn over, 5l, 5i)x11 times = 198p.
17) (13l, 5i)x11 times
19) (2vl, 9l, 2vl, yo, 5i, yo)x11 times
21) (2vl, 7l, 2vl, yo, 7i, yo)x11 times
23) (2vl, 5l, 2vl, yo, 9i, yo)x11 times
25) (2vl, 3l, 2vl, yo, 11i, yo)x11 times
27) (2vl, 1l, 2vl, yarn over, 13i, yarn over) x 11 times
29) (3vl, yarn over, 15i)x11 times
30) 198l (in this row, yarn overs are knitted with a crossed knit stitch)
31) 198i
32) 198l
Close the loops.
Shirt height 8.5 cm.

Oval face wrap

Using a hook and thread, cast on approximately 136 stitches along the right side on 2.5mm needles. The number of loops must be a multiple of two.

Knit one row with purl stitches, then 14 rows with an elastic band of 1l by 1i (3cm). Using 3.5 mm knitting needles, knit one row with knit stitches - this is the place where the elastic is folded, then using 2.5 mm knitting needles, 14 rows of elastic. The width of the finished elastic band is 3 cm.
If desired, use an elastic thread to crochet a chain on the inside of the knitted elastic band in the area of ​​the fold.

The purpose of this elastic thread is to prevent the facial oval band from stretching.
Hem the knitted elastic from the inside out along the open loops.

Abbreviations:
1l- 1 front loop.
1i- 1 purl loop.
1 to- at the beginning of the row the loop is removed as a knit stitch, at the end of the row it is knitted purl.
2vl- 2 together facial with a tilt to the right.
2vlp- 2 together facial with a tilt to the left (with a broach).
3v- Slip 2 onto the right needle without knitting, 1 knit stitch and pull 2 ​​knit stitches through it from the right knitting needle.
5 butterfly- Remove 5 knit stitches without knitting, stretch the thread before work.
4 butterfly- Remove 4 knit stitches without knitting, stretch the thread before work.
3 butterfly- Remove 3 knit stitches without knitting, stretch the thread before work.
knit a butterfly from 5 loops - for rotary knitting: 2i, insert the right knitting needle behind the work through the stretched loops and transfer them to the left knitting needle, then knit from together with the next loop of the purl row to make one loop, 2i.
for circular knitting: 2k, insert the right knitting needle under the broaches from bottom to top, then into the knit stitch from left to right (as when knitting a knit stitch) and knit the broaches from the knit stitch together to make 1 knit stitch, 1k.
knit a butterfly from 3 loops - for circular knitting: 1l, insert the right knitting needle under the broaches from bottom to top, then into the knit stitch from left to right (as when knitting a knit stitch) and knit the broaches from the knit stitch together to make 1 knit stitch, 1l.

Advice

When knitting with wool thread, I have long used the dry felting method when connecting threads from different balls. The threads connect quickly and easily, the connection point is absolutely invisible.
Both threads need to be divided along the fibers to a length of about 8-10 cm (Fig. 1), one of the parts of each thread should be torn off (Fig. 2), the threads should be overlapped (Fig. 3) and placed on the palm, rub the palms for 1-2 minutes each other.
For clarity, I found a picture.

Knit with pleasure!

Collection of children's knitted hats for boys

Head circumference:54 cm

You will need: 50 g Lana Gatto Gomitolo (225m - 50g); circular knitting needles No. 2.5.

Elastic band: knit alternately k3, purl 2.

Work order: cast on 160 stitches on circular knitting needles, close the knitting in a circle, make sure that the work does not twist and continue knitting in the circle with an elastic band. At a height of 11.5cm, start making decreases. Knit as follows - 38 loops with an elastic band, knit 2 loops together, 38 loops with an elastic band, knit 2 loops together with a knit, 38 loops with an elastic band, 2 loops knit together with a knit, 38 loops with an elastic band, knit 2 loops together.
When knitting two loops together, I knitted the first and second loops together using the back half of the loop, but before that I removed the front loops and turned them around (I knitted the front loops in a circle using the front half of the loop), so that when knitting two loops together behind the back half of the loop, the loop would turn around remained the same as in the other loops.
In each subsequent row, decrease in the same way, while the number of elastic loops between reductions will gradually decrease.
When there are 12 loops left in the work, pull the thread through them, tighten and fasten.

Dimensions: head circumference - 54 cm

The hat is knitted in the round!!!

You will need: Mondial Giada (50g - m) - 50g; knitting needles No. 3.25.

Work order: cast on 108 stitches on needles No. 3.25, place a marker and knit in a circle. Make sure that the knitting does not twist.

Rib: Row 1: *P3, k2, p2, k2; repeat from * in a circle.

Repeat row 1 until the height of the elastic reaches 4.5 cm from the beginning of knitting.

Finish knitting the elastic on the middle loop in a group of 3 purl loops.

Start knitting according to the pattern, row 3. Make sure that the repeat of the pattern falls on a group of loops: p2, k2, p2, k2.

Knit rows 3-20 according to the pattern. After this, continue knitting with an elastic band 3 p., 2 knits., 2 p., 2 knits. to the height of the cap 15cm from the cast-on edge.

Shaping the crown:

Row 1: P2. together, p1, k2, p2, k2.

Row 2-3: P2, k2.

Row 4: P2. together, 2 persons.

Row 5: P1, k2. together

Row 6-8: K2. together until there are 5 loops left in the work.

Pull off the remaining loops.

Knitting pattern:

*******************************************

Head circumference: 52 - 54

You will need: approximately 50 g each of 100% mercerized cotton in dark blue and white colors 50 g - 120 m; circular knitting needles No. 2.5.

Work order: cast on 120 stitches on circular needles No. 2.5, close the knitting and then knit in the circle with an elastic band. Knit the front loops with a dark blue thread, and the purl loops with white thread. Skip the non-working thread BEHIND knitting. Having knitted 10 cm in this way, start decreasing; to do this, knit 2 purl loops together in every second strip of purl loops. After 2.5 cm from the beginning of the decreases, knit 2 purls in the remaining strips. loops together. Having knitted another 4 cm, continue decreasing the loops - knit the second loop from the front track together with the first loop of the purl track together with the front one. Perform such decreases of loops through the “track”. After another 1 cm, perform similar decreases in the remaining multi-colored stripes. Only the dark blue thread remained in the work. After knitting 1 cm in stockinette stitch, decrease stitches by knitting every 2nd and 3rd stitch together. Tighten the remaining loops with thread. Crochet the bottom rim of the hat with 2 rows of single crochets.

The idea is the "Turn A Square" model by Jared Flood from Brooklyn Tweed (http://www.ravelry.com/).

I recalculated everything completely for the required size and available yarn.

Size: 54 cm

You will need: 50 g of red yarn Mondial Delicata Baby (100% merino wool) 50 g - 215 m; remnants of similar yarn in white and dark gray colors; knitting needles No. 2.

Knitting density: 31 p x 49 p = 10x10cm, knitted with stockinette stitch.

Knit stitch: knit all stitches in circular rows.

SSK: decreasing stitches - slip one as a knit stitch on the right needle, slip one as a knit stitch on the right needle, thread the left needle into the two removed stitches and slip them, knit both stitches together as a knit stitch on the back arcs of the loops.

Description of work:

Using a red thread using circular knitting needles, cast on 172 stitches and close the knitting in a circle, making sure that the work does not twist.
Knit the next circular row *k2, purl 2. Repeat the previous row (this will install the 2x2 ribbing) until the height is 2.54cm.
In the next circular row, switch to larger knitting needles and knit a row with increasing stitches: *K43, yo* (4 times), 176 stitches on the knitting needles.
In the next row, knit yarn overs using the back half of the loop.
Switch to white yarn and knit 4 round rows.
Then return to the red yarn and knit 6 rows.
Continue knitting in the same way, alternating stripes of red and white flowers (4 and 6 rows, respectively). Make sure that the threads from different balls intertwine at the places where the balls change. Make these strips until the height of the cap is 8cm from the cast-on edge.
Then knit 15 rows with a red thread and in the next row replace the white thread with a dark gray one. Continue the pattern with stripes (4 rows of dark gray thread, 6 rows of red).
The top of the hat.
Having knitted 4 rows with a dark gray thread and 6 rows of red, start making decreases. Work as follows: K44, place a marker, K44, place a marker, K44, place a marker, K44, place a marker. Currently, 4 places for reductions are marked in the work.
Round 1: K2. together, *knit up to 2 remaining stitches before marker, SSK, slip marker, k2. together* (3 times), knit to 2 remaining stitches in round, SSK.
Round 2: Knit all stitches.
Repeat last 2 rows, switching to double-pointed needles if necessary, until 8 stitches remain between each marker (36 stitches on needles). Start decreasing in each round until there are 8 stitches left on the needles. Break a thread approximately 18cm long, thread it through all the loops and tighten.
End of work.
It is highly recommended to steam the beginning of the decreases for a smoother fit and formation of the top of the cap.
joint knitting on the forum

*********************************************

Head circumference - 46-48 cm

You will need: 75 g blue cotton yarn, straight knitting needles No. 2.

Elastic band: alternately knit 2 knit stitches, 2 purl stitches.

Description of work: Cast on 196 stitches on needles No. 2 and knit with an elastic band. At a height of 17 cm, make holes for the cord; for this, knit *2 knits, yarn over, repeat from *. Continue knitting with an elastic band. At a height of 20 cm from the beginning of knitting, close all the loops at the same time. Weave a braid from 9 strands of yarn and secure the ends. Sew the back seam, pull the cord in and pull the cap off, tying the cord at the back of the cap.

EARS Mark the location of the cap ear and cast on 40 stitches from the cast-on row. Knit with an elastic band. Having knitted 2.5 cm, start cutting - in every 2nd row on both sides, cut 2 loops until 4 loops remain in the work. Continue knitting the tie with knit stitches along the front side (chrome, 2 knit loops, chrome). Having tied 15 cm of strings, close the loops by pulling them together. Knit the second eye in the same way.

To finish the edge of the cap, cast on loops from the edge of the tie through the front to the other edge of the tie, knit one row along the wrong side with purl loops and bind off all the loops on the front side. Tie the back of the cap in the same way.

**********************************************

The idea, design and execution are mine (Natalia Pelykh).

Head circumference: 50-52

You will need: 75 g of 100% natural fine gray wool, leftover white and dark burgundy colors. Knit in 6 additions.
straight needles No. 2.

Front stitch: front rows - faces. loops, purl rows - purl loops.

Garter stitch: knit and purl rows - knit. loops.

Elastic band: alternately knit 4 knit loops, purl 4 loops.

Ornament "Snowflakes": Knit according to the pattern.

Hat: Start knitting with strings and ear. To do this, cast on 2 loops on the knitting needles with gray thread and then knit in garter stitch, adding 1 loop on both sides in every 2nd row. When the number of stitches reaches 8, knit straight. Having knitted a string of the required length (in my case - 17cm), add 1 loop again on both sides. There are 10 loops in total. Next, we continue to knit the ear of the hat with garter stitch, adding 1 loop on both sides in every second row. Having knitted 2 rows in garter stitch, continue working in the following sequence - knit 2 outer loops on both sides in garter stitch - the rest in stockinette stitch. When the number of loops in the work reaches 28, set aside the knitted eyelet with a tie.
Knit the second eye in the same way.
Next, knit in the following sequence: 18 loops of the back half, 28 loops of the ear, 63 loops of the front part, 28 loops of the ear, 18 loops of the half of the back.
Total in work - 18+28+63+28+18=155 loops.
Start knitting the front and back of the head in garter stitch, knitting 2 rows, then switch to the front stitch. Continue knitting the ears in stockinette stitch. Having knitted 10 rows in stockinette stitch with a gray thread, knit 1 row with a dark burgundy thread and then proceed to knitting the “Snowflakes” ornament with a gray thread on a white background. Knit according to the pattern, distributing the snowflakes over the hat. I alternated the snowflakes with 4 stitches of white stockinette stitch, so I ended up with 10 snowflakes. Having knitted the repeat in height 1 time according to the pattern, perform 1 row with the stockinette stitch of a dark burgundy color. Then continue knitting with gray thread. After knitting another 15 rows in stockinette stitch with gray thread, start making decreases. To do this, knit 2 loops together every 15 loops. Make decreases in each front row over the decreases of the previous row, knitting fewer stitches in the interval between decreases. Decrease stitches until there are 10 stitches left in the work. Switch to a dark burgundy thread and knit in stockinette stitch for 10 cm, then pull off all the stitches. Sew the tail, tie it in a knot, and sew the back seam of the hat. Tie the entire hat with 1 row of maroon thread in garter stitch.

Scarf: Cast on 58 stitches of maroon thread and knit with an elastic band in the following color sequence: 16 rows with maroon thread, 2 rows with white thread, 8 rows with gray thread, 2 rows with white thread, 18 rows with maroon thread, then 132 rows with gray thread. Finish the scarf symmetrically. Decorate the edges of the scarf with multi-colored tassels.

Scheme "Snowflakes":

********************************************

The idea, design and execution are mine (Natalia Pelykh).

HAT.

Head circumference: 48 cm

Front stitch: front rows - front loops, purl rows - purl loops.

Garter stitch: knit and purl rows - knit stitches.

Broaching: slip 1 loop, knit 1 stitch and pull it through the removed loop.

Description of work: cast on 122 stitches on knitting needles with blue thread and knit between the edges in stockinette stitch. After knitting 10 rows with a blue thread, continue knitting in the indicated sequence of alternating colors. Having knitted 8 cm from the beginning of knitting, begin to decrease. Decrease on the front side between the edges as follows: * 1 stretch, 10 knits, repeat from *. In the next 6th row * 1 stretch, knit 9, repeat from *. Decrease in the same way 1 more time in the 6th row, then 2 times in every 4th row and then in every second row until 12 stitches remain on the knitting needle. In the next row, knit between the edge stitches every 2 stitches together. persons = 7 p. and knit another 5 cm knit on the remaining loops. satin stitch of dark blue color. Pull the loops together with working thread. Sew the back seam. Tie the top ponytail. Mark where the ears on the hat should be (about 10.5 cm from the back middle of the hat) and cast on 20 loops on each side, knit 10 rows in garter stitch. To bevel the ears on both sides, cast off 1 loop in every second row 1 time, 2 loops 1 time, 3 loops 1 time, 2 loops 1 time, then knit garter stitch ties 11 cm long. Pull all loops into one and close. To finish the edge of the cap, use a dark blue thread to cast on loops from the edge of the tie through the front to the other edge of the tie, knit one row along the wrong side with knit stitches and bind off all the loops on the front side. Tie the back of the cap in the same way. Make multi-colored tassels and sew them to the ends of the ties.

Dimensions: 70x12 cm

You will need: 20 g of yarn (14% cashmere, 35% angora, 51% merino) in light yellow, blue and dark blue colors; straight knitting needles No. 2.5.

Elastic band: knit between the edges alternately 4 purl, knit 4, finish with 4 purl.

Sequence of alternating colors: 4 rows with dark blue thread, 4 rows with blue thread, 4 rows with light yellow thread.

Description of work: cast on 46 stitches with blue thread and knit 6 rows with an elastic band, then continue knitting in the indicated sequence of alternating colors. After knitting 70 cm from the beginning of knitting, bind off all the loops. Tie 1 r. with a blue thread. Art. without quilting the side of the scarf. Decorate the ends of the scarf with multi-colored tassels.

Head volume: 52-54 cm

You will need: 75 g Gedifra Merino De Luxe gray merino wool (50 g - 150 m), size 3 circular needles.

Elastic band: knit alternately k2, p2.

Knit stitch: knit knit stitches in the round.

Description of work: Cast on 152 stitches on circular needles No. 3 and knit in the round with an elastic band. At a height of 14 cm from the beginning of knitting, bind off 54 loops for the cutout and then continue knitting not in a circle, but in the forward and reverse direction. Having knitted in this way 12 cm in height, again cast on 54 loops and continue knitting in the round. At a height of 8 cm after casting on loops, reduce the number of loops to 78. Divide the loops along the entire row into 10 identical parts and then knit with stockinette stitch, cutting 1 loop in each of the 10 parts in every 2nd row. Pull the remaining 10 loops with double thread and fasten to the wrong side of the hat. If desired, crochet the opening of the helmet 2 p. Art. double crochet

Knitting is a favorite pastime for many needlewomen and beginner sorcerers. If you have not yet tried to knit such an accessory as a hat for a girl, if you have not yet created a tiny hat for a newborn or a warm “boy” helmet– this article is definitely for you. We invite you to plunge into the world of warm creative activities and gentle touching interweavings with us.

Knitting a hat for a baby is a whole sacrament, a gentle art, which is based on love and maternal care. Therefore, a number of mandatory requirements are put forward for this accessory. A hat for a newborn baby from 0 to 3 months must be hypoallergenic, comfortable and soft. Better for knitting select yarn with markingsBaby (for children), which consists of natural wool and acrylic (approximately 50/50), we take thin knitting needles - 3-4 mm.

Children's winter hats can have different shapes, designs, decor and patterns. A little later we will tell you how to knit a hat and a helmet for a boy, since this model is very popular among kids and parents. And right now let’s start with knitting for the little ones.

To knit a hat for a newborn baby or toddler using a pattern for beginners, you don’t need to have a lot of experience or super-unique abilities. In this section we will talk about myselfsimple ways to knit a baby hat: This is a now popular hat with a knot and a cute cap that tightly covers the ears.

Funny gnome hats with a knot are often used in photo shoots; this headdress is very light and practical. The cap is usually tied at the top of the head with a knot, and when the baby grows up, the tail is loosened and the cap fits perfectly on a small head. Such beauty and cuteness can be connected in several ways. In front of you knitting pattern for a Kilkenny hat with ears so that the baby does not freeze in autumn and winter.

Here is another option for how to knit a hat for a boy. However, such a beautiful cap-hat is also suitable for a tiny girl. To work you will need 100 grams of yarn, a set of double needles (4.5). We will knit in circular rows, all stitches are knit (for a head circumference of 34-37cm).

1. We cast on 60 stitches onto the knitting needles and distribute 15 stitches onto each one.
2. We knit 24 rows facial stitch.
3. To form the crown in the fourth row on each knitting needle, decrease one stitch, knitting two together.
4. When there are 20 loops left, we begin to knit a knot, making 20 rows with the same pattern. Then we tighten the knitting with a working thread.

Children also often wear bonnets, and they are also available in a huge range of warm “knitted” designs. Today children's caps are accepted decorate with various patterns, ornaments and knitted decorative elements. Next, you will see how to knit a hat for a newborn using knitting needles with descriptions and patterns, with various cut and decor options.

How to knit a hat for a boy with knitting needles?

Hats for boys have long ceased to be boring, dark in color and uninteresting in their shape, content and design. A modern boy's cap is decorated playful ears, a funny animal face or a cozy fur pompom. Your child will wear such a headdress with pleasure, and we will teach you how to knit it correctly.

To knit a fashionable hat for your baby for the fall-winter 2018-2019 season, you should buy soft natural yarn and stock up on fresh ideas. Fortunately, new knitted hats appear regularly; you just have to have time to master them.

These are such beautiful hats that can be worn as both autumn and spring models, they are knitted very simply, and if you have skills in working with knitting needles, you can knit according to our recommendations.

1. Cast on 80 stitches on the needles, then measure the circumference of the child's head and select the required number of loops.
2. Knit four centimeters elastic band pattern(Knit 4/Purl 4).
3. Switch to stockinette stitch and knit 12-15 centimeters with it.
4. Decrease stitches until eight stitches remain on the needles.
5. Pull the working thread through the loops and tie it.
6. Make a pompom from yarn or fur and attach it to the hat.

Knitting patterns for children's hats with description: photo

Try creating more several interesting models

Panda hat Your child will surely like it and he will be happy to wear it.

Children's hat with earflaps It is knitted according to the following pattern - we recommend making it for winter, it covers the ears and neck perfectly.

If your child is no longer a child at all, but a real teenager, then you probably know how interested he is in fashionable hat models and other accessories.

Knitted children's hats for girls: with diagrams and descriptions

Girls are even more picky about delicate fashion issues than boys, so here we will try to please them and select the most beautiful and stylish hat models To.

Beanie hat should be in every fashionista's wardrobe. To knit it, you can use both natural wool threads and soft hypoallergenic acrylic.

like this pumpkin hat, you may not put it on a child every day, but in gloomy autumn weather it will definitely cheer up.

Another autumn hit - checkerboard hat. Choose a current, fashionable color this season, and your child will definitely not forget to put on a hat.

Bright pink hat knitted with braids and pearl pattern– your fashionista will be delighted with such a gift.

For the baby – two-color warm hat with pompoms.

A warm hat with earflaps will cover your ears, and will also decorate any outerwear with its snow-white exoticism. The yarn for making it is half-wool, the pattern is garter stitch and the familiar “braid” to many.

Hat helmet for a boy with a detailed description

The idea of ​​knitting a hat-helmet is not new at all, but every season more and more models of this wonderful headdress appear, which reliably covers the baby's ears, head and neck from the cold.

We will introduce you to several knitting patterns for a wonderful warm hat, and you will choose the most beautiful one for your baby.

Master class on knitting a hat-helmet. The hat is very warm - double, knitted with a lining.

Size: head circumference 54 cm.

Yarn (taken with reserve): for lining 100 g of Pekhorka yarn "Magnificent" (30% angora, 70% acrylic; 300m/100g)

For the main part (if with a pattern): 100 g of Semenovskaya “Svetlana” yarn (95% wool, 5% acrylic; 250m/100g) and 50 g of yarn of a different color.

Knitting needles No. 3 and No. 1.5.

Description: on knitting needles No. 3, cast on 6 sts. Knit 1 purl. row. Next, we make increases in each front row up to 19 stitches (of which 2 are edge stitches). We knit all purl loops purl. We mark 5 main (raglan) loops near which we will add loops.

Add 1 stitch on each side of the raglan stitches on each knit row. We knit with 8 cm increments.

After this we knit in regular stockinette stitch. You can do it in a circle. In total, I got 52 rows in height and 140 loops on the knitting needles.

Next stage. We knit the back part and ears of the helmet cap. To do this, we knit 40 loops on each side from the back seam, and leave 60 loops on the forehead.

In each front row, from the back seam side, decrease 2 loops 6 times. I added a stitch on the front row and made decreases on each side. I started decreasing from the 6th row.

After decreases, another 10-12 rows. It's better to measure. Everyone's kids are different. I knitted 30 rows for the back and ears. We put off knitting.

We collect loops for the face. Knitting needles No. 1.5. 60 loops from the forehead, 14 loops on the sides and 20 loops on the chin.

We knit 1 purl row on the front side. Next, use 1x1 rib for 10 rows. If the hat is a single loop, we close the loops, if it is a double loop, we leave it on the knitting needles.

We knit a shirtfront. Under the chin, we cast on 20 loops from the front part and, together with the remaining loops, knit 4 rows in stockinette stitch.

Then we mark the raglan loops in this way. 23 loops on the front, 21 loops on the back and shoulders and 1 loop on the raglan.

Add 1 stitch on each side of the raglan stitch on every second row. We knit to the length you need. And if the hat is a single loop, we close it. If double, leave it on the knitting needles.

For those who knit a double hat, a helmet. The main part and the lining are knitted the same way.

Assembling a double helmet cap. We put the lining into the main part. We combine the raglan lines. We connect the parts of the two shirtfronts as follows.

We knit like a double elastic band. We knit 1 loop, remove the second (from another knitting needle).

Thus, we throw over all the loops on which we have the second shirt front. Then close the loops. We finish knitting the front part in the same way.

I got it like this. The photo shows the lining and the main part.

Crocheted hat - helmet - the work of Elena Svidruk.

You will need: acrylic yarn for children's products and a hook. Elena used 2 strands of yarn and a No. 3 hook.

Description

We start knitting a hat-helmet with “BOTTOM”. To determine its diameter, there is a mathematical formula d = p (circle length or head circumference) / π (pi-3.14).
We measure the girth of the head - at 9 months the girth is 44 cm, which means d = 44/3.14 = 14 cm, i.e. we need to knit a bottom with a diameter of 14cm.
The product is knitted with a half double crochet. Knit 5 ch. and connect it into a ring.

1st row: 2 ch. lifting, 9 half-steps double crochet

In each subsequent row we make an addition. Having reached the required diameter.

• interesting selection for the site!!!
• Children's hats, without adult models

We leave the face loops unknitted, we knit the working loops with fabric. Having knitted 5 rows, we expand the fabric. To do this, we divide the loops by 3 (I got 18 stitches) and double every 18th stitch - it turns out only 2 times (half double crochet, double crochet, half double crochet). We knit the required length:

We collect several air loops and connect the product into a circle. Next we knit in a circle. Having knitted 3 circular rows, we again begin to make increases.