Each of us learns how to tie shoelaces correctly in early childhood. Undoubtedly, for a child this activity seems difficult and interesting. However, an adult can hardly be surprised by information on how to quickly tie his shoelaces. For us, this activity already seems ordinary and boring. Can ordinary tying of shoelaces turn into a creative process? Of course, if you approach the matter responsibly and don’t just intertwine them crosswise, but create real patterns. So, forget about everyday life and tie your shoelaces beautifully.

"Lattice"

Despite the complexity of implementation, this method is popular. However, if the actual question is how to quickly tie your shoelaces, then this method is unlikely to be suitable, since it takes a lot of time. The “lattice” should be done very carefully, and haste is inappropriate here. In order to simplify the work at least a little, first weave with one end of the cord, and then, through the resulting lattice, pass the other. This weaving will look good only on shoes that have at least 6 pairs of holes, and it’s better if there are even more of them. There is a slightly similar method called "Lattice Lacing". This is a more economical method, for which you can use shorter laces and make the lattice less dense.

"Ladder"

When wondering how to tie your shoelaces, pay attention to the “Staircase” option. This method is quite simple. First, the lace is passed through the lower holes with the ends outward, then passed through the next upper ones. After this, the ends of the lace are crossed and passed under the bar of the opposite end, and then into the upper holes. At first glance, this weaving method resembles a ladder, hence the name. By the way, this is the method that American soldiers use to lace their dress shoes. This option is useful if the laces are too long and need to be shortened a little. Despite the originality, the technique has one drawback - the laces tied in this way are difficult to tighten.

Straight lacing

If you have a question about how to quickly tie your shoelaces, then this option is just for you. The only simpler method is the conventional criss-cross tying method. To begin with, the lace is passed through the lower holes so that the ends are inside. After this, the right end is passed through the next upper hole, and then into the opposite one. The same procedure is repeated with the left end, only one hole is missed. This technique is best suited for weaving with either plain laces or contrasting colors.

"Chess board"

If someone is interested in how cool it is, then you can’t think of a better option. This method is the most vibrant and beautiful, especially if you use flat laces of different colors. This technique will completely transform even the most ordinary-looking shoes. So, take two flat laces. One of them is tied as described in the “straight lacing” option. Then, starting from the bottom, thread the second lace, intertwining it with the first. Having reached the top, they make a turn and weave in the other direction. The only drawback of the technique is that the shoes do not fit very firmly on the foot, but they look really original.

"Butterfly"

This type of weaving is most suitable for girls who are interested in how to quickly tie laces on sports shoes. First of all, the lace is passed into the lower eyelets with the tips inward. They are taken out from the next upper holes and intertwined with each other. Next, the same procedure is carried out with the next pair of eyelets. This type of weaving is very convenient if the laces are too short.

"Saw"

The second name for this technique is “Lacing with an inclination.” It looks quite original and is very easily and quickly tightened with just one end of the lace. When performing the technique, it is very important that the shoes are laced in a mirror image. The lace is threaded through the lower holes with the tips inward. Next, the left end is passed into the upper hole with the end outward, and then into the opposite hole. The right end is passed diagonally under the left inside the shoe. They go out into the top hole one hole above the left end. This weaving technique looks most advantageous if it is made with contrasting colored laces.

"Roman numerals"

By performing a similar technique, the number of resulting Roman numerals can be changed depending on the number of holes on the shoe. So, first, the ends of the lace are brought out through the lower and upper holes of the right row, then they are crossed and the same is done with the left row. One end of the lace is lifted, passing one hole, the other is brought out and pulled to the opposite side. The result is a rather interesting pattern, reminiscent of the Roman numerals X and I.

"Display"

This option is ideal for sports shoes. Thanks to the weaving, it is incredibly easy to control the tension of the laces, which is very important for athletes. After all, the result often depends on how comfortable the shoes fit. If a person has a wide foot, then the ends of the laces are first passed along the lower eyelets, and then crossed. If desired, you can alternate between crossing and skipping. If your foot is narrow, then it is better to choose shoes where the eyelets are located in a zigzag pattern, and lace only through the far holes. This way, the shoes will fit more tightly to the foot.

Modern production of mass clothing and footwear for children is aimed at simplifying the lives of little people as much as possible. Jackets with zippers instead of buttons, hats with Velcro instead of ties and shoes with decorative lacing. On the one hand, this is good, because the child will not lose precious time getting ready for kindergarten; on the other hand, dressing and putting on shoes independently contributes to the development of fine motor skills. We do not call for abandoning convenient innovations, however, we strive to help parents who decide to help their child master the ceremony of putting on shoes. We will tell you how to teach your child to tie his shoelaces quickly and easily and show you a diagram of easy lacing.

What should a child be able to do before learning?

It is necessary to develop fine motor skills and skills in working with miniature objects and things with early age. Special children's construction sets, exercise machines, and modeling kits help with this. It is still too early to master the art of lacing shoes at 1.5-2 years old, so do not complicate your baby’s life with knowledge that is not yet necessary. The second question is if the child is precocious and shows an active interest in putting on his own shoes and lacing.

Before you start introducing your child to shoes with real laces, give him the opportunity practice on a special lacing machine. Its specific expression varies: toys, palettes with holes and color schemes, wooden blanks in the form of shoes. Which one to choose is up to you and your child to decide. If your child is already 4 years old and is great at doing crafts at home or in the garden, create your own template lacing machine and do it together with your baby using scrap materials.

Conduct training on a foreign object at least two weeks: master different types of lacing and knots. After this, move on to your baby putting on lace-up shoes on his own.

Please note: The first attempt to do lacing yourself while getting ready for a walk should not limit the child to a time frame. He should be able to correct mistakes, or do the lacing that seemed most interesting during the learning process.

Rules for tying shoelaces

The first independent tying of shoelaces should take place next to one of the parents. Moreover, the parent should not act as an outside observer: he should become active element for copying. Consider a few nuances first lacing:

• Settle down on the same line with baby. Ideally, it will be one shoe bench. The child should watch you from the side. Do not sit opposite: it is difficult for the baby to perceive movements made in a mirror image.
• Start easy: tie knots, hiding the free ends of the laces behind the side sides of the shoes. Explain to your child that if he cannot cope with a full-fledged bow, he can always resort to an easier method. Also add that this method is less safe and the baby may fall if the ends of the laces come out of the shoes.
• Praise child for small victories over uncooperative laces, and do not reproach him if something does not work out. Prompt the procedure, but do not interfere in the process until the baby himself asks for it.

Method from Jan Figgen

Do you know who he is Ian Figgen? No, this is not a child psychologist. This is the man who came up with 31 original ways to tie shoelaces. Among the execution techniques, there are some downright complex ones, and there are those that can be mastered in a couple of seconds. One of these types of lacing was noticed by American educators to teach their students how to quickly and easily tie shoes. We'll explain how to do lacing step by step:

1. Make a starting single knot from left to right. Pass the right lace between your right index finger and thumb. Wrap the left rope in the same way: use the remaining fingers of your left hand to keep the lace taut. You will get 2 loops.
2. Cross the resulting loops: push the loop into the left hole with the thumb of your right hand. Using your right middle finger, push the free end of the right loop between the thumb and index finger of your left hand.
3. Use your left thumb and index finger to grab the loose right end of the loop. Then, with your right thumb and middle finger, grab the free left end of the loop.
4. Pull the ends of the loops through their own holes on the opposite side. Tighten the knot tighter.

Before teaching your child how to lacing from Jan Figgen, test the material on your own shoes, away from your child's eyes. You must be sure that when teaching your child, your skills will be enough so as not to disappoint your child. Check out the photos so that your learning process and that of your child will be comfortable.

Watch a video that demonstrates this method clearly. You will definitely see that everything is easier than you think.

Even if you prefer to buy Velcro shoes for your child, spend some time learning how to lacing and tying knots. This knowledge will be useful to the child at an older age, and will also help develop fingers for working with small parts. We hope that our recommendations helped teach your child how to tie his shoelaces quickly and easily.

It would seem that tying shoelaces beautifully is a simple matter, but in fact mathematicians have developed more than 4 million ways. In practice, it is difficult to see all the proposed options, but experts advise several of the simplest and most creative options for all occasions. You can weave laces with a bow at the end or with a hidden knot, in traditional and unusual ways.

Sneakers are sports informal shoes that accept any lacing options. Older men prefer to lace their sneakers using simple techniques; young guys tend to want to stand out, including using the most extraordinary shoe lacing techniques. Therefore, it is worth considering the most popular techniques, choosing options that interest you and practicing.

There are several simple and interesting ways to tie laces on sneakers without a bow, that is, with a knot hidden from view. Recently, these methods have become very popular, and stylists advise starting practice with the following techniques:

1. Lines— weaving based on the principle of snake movement, looks discreet and original. To do this lacing of sneakers, you need:

1. Net- weaving according to the snake principle, but without missing holes. You need to weave in the following sequence:

1. Classic version- the principle of weaving crosswise, to obtain it, you must do the following:

1. Lapped lines- the principle of weaving laces with lines and forming crosses with them. To get such a pattern, you need to perform several steps:

• the edges are laced into two holes, after which they are moved 2 holes up and laced in the opposite row;
• at the same time you need to lace the edges into the upper holes of the same row;
• now they go down 2 holes lower, after which, in the same sequence and synchronously, they weave each lace into the original row;
• The ends of the laces are pulled into the remaining holes, forming a knot on the wrong side.

1. Corset- here the principle of weaving is repeated, as in the classic version, but every time the laces are directed into opposite holes, they will need to be twisted together. The edges are finally tucked inward so that the laces do not stick out.

Advice! To tie the laces correctly without decorating the end of the bow, you need sneakers with an even number of holes, ideally there should be 6 of them. Otherwise, the man will have to improvise, reducing the number of steps.

How to tie laces on sneakers with a bow?

If a man wants to tie his shoelaces with a bow, you can use the techniques described above, but without moving the knot to the wrong side. You can also learn how to tie shoelaces on sneakers in other variations, for example:

• Lacing for sneakers with 4 holes. In this case, you can use the “Lines” and “Corset” techniques, reducing only the number of steps to 4, and also at the end placing a bow on top of the tongue of the shoe. There is a second option - the lace is threaded through both holes, after which each edge is pulled up and tied into a bow. The third method, with an emphasis on the bow, is to thread both laces through two holes, then pass the ends into the upper holes of the same row, forming a large knot.
• Lacing of high-top sneakers. It also looks at three options for how to quickly tie your shoelaces. The first method is the classic version described above, but with the design of the outer knot in the form of a bow. The second method is classic weaving, but with the laces threaded each time along the top side, and not from the bottom. The third option for high top sneakers is to use multi-colored long laces, tucking them alternately using any of the techniques described above.

In general, stylists advise taking a closer look at new techniques and classic options on how to weave laces on sneakers with a bow. These are the Ladder technique, the Zipper technique, the Double back technique, etc. But not every technique is simple, so you will need not only theory and photos, but also video instructions to clearly show everything steps and techniques.

How to tie laces on sneakers in a fun way?

Not everyone knows how to tie a shoe so that it looks stylish and unusual. To do this, different figured lacing techniques are practiced, which are difficult to master the first time. Stylists are ready to name the top 10 names of techniques on how to tie shoelaces fashionably, but it is better to watch the instructions in video lessons, since only visually you can achieve an identical result as in the pictures.

Do you use unusual lacing?

YesNo

So, the top 10 creative lacing includes the following techniques:

1. Ladder- ideal if you need to lace long laces, and stylists advise repeating this on high-waist sneakers, using multi-colored and bright laces.
2. Hidden node- a neat and stylish variation of weaving, which is suitable for cycling, sports and running, when a man does not need a bow in the way.
3. Zip zipper- this original lacing is suitable for sneakers and skating and roller skating. It is characterized by its strength and reliability of design.
4. Hash— if a man needs to quickly and at the same time tie his shoelaces in an original way, this technique will create a checkered pattern, emphasizing individuality.
5. Double reverse lacing- a technique similar to the classic version, but more expressive and original. Moreover, it perfectly fixes the shoes on the foot.
6. Double colored lacing- If you want to tie your laces easily, but with a great pattern, this is a great option. Here it is better to use laces of two contrasting colors.
7. Racer lacing- in this technique, a knot is formed in the middle of the shoe, but it is better to take shoes of medium height.
8. Lacing for footbag (socks)- if a man has wide feet, this lacing will allow the edges of the sneakers to be slightly spread apart, for example, for playing ball.
9. Chess board- this weaving of laces in two colors (preferably white and black) looks cool and bright on wide sneakers, for example, on professional Adidas sneakers from the latest collections. Lacing does not accept tying laces, and it also looks great under clothes of the same color line.
10. Lattice— you can tie your laces cool using this complex but original technique, which is also suitable for wide sneakers. This is a youth and trendy technique for young people, which requires a certain skill and practice.

Expert opinion

Helen Goldman

Male stylist-image maker

Only a man who has detailed instructions with photo or video lessons at hand, and also has free time and patience, can learn complex weaving techniques. If he needs to quickly tie his shoelaces, he should look at more traditional methods.

How to tie long laces on sneakers?

If a man has beautiful and original long laces, many of the above weaving techniques may not be suitable, as they will leave long edges of the laces in the end. For such purposes, separate techniques have been invented that use the entire length of the laces during weaving. Namely:

• Hidden Knot- this technique was described above, where it is assumed that the laces are directly intertwined without crossing or diagonal directions. In addition, this weaving will have a hidden knot, which means that no matter how long the lace is, its remains will be properly hidden on the wrong side of the lacing.
• Lace Knotted- one of the strongest and tightest lacings, where, when crossing, two laces are twisted into strands, after which they diverge in different directions into holes. There is a bow at the end, although experts advise periodically camouflaging it under the tongue of the shoe, experimenting with images.
• Chess board- using two colors of laces, one is made into a weave similar to the Hidden Knot technique, after which the second lace is used, intertwining it perpendicularly with the first lace. As a result, both edges of the laces need to be decorated with a hidden knot under the tongue of the shoe.
• Twistie- here one lace is involved, which is threaded from the bottom, divided into two equal parts, intertwined with each other in a full turn, passed through the next holes on the inside and the turn is repeated. This principle is continued to the very top, ending the lacing with a bow.
• Loop back- a similar technique to the previous version, but here there is one turn of the laces, while Twistie makes a double turn. In addition, each part of the lace will only stretch on one side of the shoe.

In fact, these are not all weaving techniques that are suitable for shoes with long laces. Experts are constantly developing new methods of figured and patterned lacing, where, thanks to a large number of manipulations, the entire length of the laces will be used.

How to tie the laces on a child's sneakers?

Experts also name several of the simplest techniques that can be practiced for lacing a child’s sneakers. Many of them have already been mentioned earlier, but their style is appropriate both in the image of a child and in an adult look. For example:

• classic zigzag lacing;
• straight lacing with parallel lines;
• extreme lacing, similar to straight lacing, but with a mirror arrangement of the edges of the lace;
• sawtooth lacing with asymmetrical lace arrangement;
• Butterfly lacing for short laces.

All techniques are easy to learn if you look at each step and a photo demonstrating it. Such methods will look especially stylish on bright laces made of different textured materials.

Conclusion

Lacing sneakers is not just an ordinary task, it is an unplowed field for the manifestation of creativity and your individual style. Above, numerous methods were proposed for weaving laces, both with and without a bow, for long laces, different versions of sneakers, curly creative methods, as well as simple methods for lacing children's shoes. All that remains is to choose your option and practice visually.

It would seem that such a simple task as tying shoelaces should not cause any difficulties, but not everyone knows about the possible variety of patterns on their sneakers or sneakers. Such a trifle often helps you stand out in a company of friends, and the more intricate the pattern, the more interest you will arouse among others. Let's look at the most popular methods of tying shoelaces.

Lacing shoes "ladder" is very common in Europe. By passing the end of the lace through both holes in sneakers, sneakers or boots, a very neat and well-groomed appearance is created. In addition, the method of tying this way is relatively simple: first, the lace must be passed through both lower holes and pulled out from each end. Then we take one end and bring it out through the top hole (crosswise). The second end is brought out in a similar way - crosswise, only through one lacing hole.

Both laces “dive” into holes located horizontally near the place from which they appeared. This way, you'll lace up your boots fairly quickly and accurately, and you don't have to worry if at first you don't think anything good will come of it.

Did you know? “Ladder” lacing is often used on military shoes, which is due not only to its reliability, but also to the ability to quickly remove the shoe if a leg is injured (such “ties” are easier to cut with a knife).

In addition to military boots, the “ladder” is also convenient to use on any other high shoes.

Additional knots on each tie increase the strength of the entire lacing and improve the appearance of the shoe. The knotted version is ideal for skates and ski boots.

To perform lacing this way, you need:

• Insert the ties into the bottom holes and pull the two ends out (we start from the inside, that is, the lace should go from the bottom of the hole to the top).
• Cross the ends over each other and tie them once on each tie.
• Spread the ends of the lace in different directions and place them under the holes, pulling them out from the front.
• Continue all the way to the top.

Considering that with each lacing tie you create an additional knot, this the tying is very strong, which is the main advantage of this option. In addition, unwanted voluntary weakening is minimized, although difficulties often arise even with intentional weakening. That is, the difficulty in loosening the laces can be considered both an advantage and a disadvantage of knotted lacing.

Straight lacing is often called “rectangular”, so when figuring out how to tie shoelaces beautifully, you need to understand that this is the same method. Its main feature is the absence of an unattractive diagonal connection at the bottom of the “seam”.
To complete the task, the lace must first be passed through the lower holes in the boots or sneakers and pulled inward on both sides. Then one end is brought up from the right side and, after it appears in the upper hole, threaded into the left hole. The second end is threaded directly into the third end at the beginning of the lacing. Then they both rise up, go out through one hole and, stretching to the opposite side, stretch higher. All steps are repeated until the space for ties runs out.

This option provides an attractive look sneakers, sneakers and other types of shoes, but the disadvantages of this method include the relative complexity of the task and the possibility of its implementation only if there is an even number of holes.

If you wish, you can easily hide all unattractive places while lacing, and the “hidden knot” will help you with this. As in the previous case, only neat and even horizontal lines will remain on the surface of the shoe, only this time even the characteristic “bow” will not be visible.
At the initial stage, all actions are performed similarly to “straight” lacing, only the left end must be made a little shorter than the right one in advance. It is this one that we leave unlaced, while the right one must be brought to the very top. That is, the lace is threaded through a hole on one side and parallelly inserted into a hole on the other. Skipping one row, it should come out in the next, but on the same side.

Both ends go into the inside of the shoe, after which they are tied there (on the left side). If necessary, you can immediately loosen the ties.

The advantages of using this method include accuracy and beauty, but the disadvantages are the difficulty of tying a knot and possible discomfort. It is also important that sneakers or sneakers had an even number of holes, otherwise you will have to leave one of them, which will spoil the overall picture.

Unusual, but quite original ways of lacing shoes include “Roman numerals” or simply “Roman”. This option will look especially beautiful on shoes without a gap between the halves. The number and location of the symbols “XX” and “II” can be alternated depending on the number of holes on the shoe.
To tie shoes, boots, sneakers or sneakers in this way, you need to follow these steps:

• First, pass the lace through the bottom left hole and, rising vertically, bring it out of the next top one.
• Cross the ends of the lace and insert it into the two holes on the right side.
• Now lift the lower end up two holes and insert it into the hole located opposite to bring it out again on the left side in the fourth.
• The left end, which was inserted into the second pair of holes, also needs to be raised up, skipping one level and taking it out of the fourth pair (on the right side).
• Cross both ends again and bring them to the left side of the lacing.
• At the very top, the laces need to be tied in a knot and the last “I” should be formed from them.

This option great for shoes, on which it looks very beautiful, but the ties are quite difficult to tighten, which also cannot be ignored.

Important! The technique for performing Roman lacing will depend on the number of pairs of holes.

One of the most difficult methods of tying, although many will certainly appreciate it from an aesthetic point of view (“the seam” is similar to a zipper, which is why lacing got its name).
Most often, this type is found on skates and other types of shoes where good fixation is required. This lacing is difficult to tighten, but at the same time it is very strong. What do we need to do to get a big “lightning”:

• We pull the lace through the lower holes (from the wrong side).
• We wrap its ends under the stitch (at this level) as if we were throwing a loop, and then thread it through the next pair of holes from the inside.
• Having crossed the ends, we hook them under the screed of a given level and rise to the higher row.
• Next, we perform the previous two steps until the space runs out.

In store windows, sellers often use a lacing option in which the ends of the laces go into the top holes and are hidden inside the shoe. The absence of a traditional “bow” on the front has a positive effect on the overall appearance of the shoe and allows you to better see the model.
The “showcase” lacing technique is as follows:

• The lace is passed through the bottom pair of holes and pulled inward at both ends without leading outward.
• Next, its ends are crossed and inserted into the next pair of holes, going up.
• This action is performed until both laces are threaded through the last holes on the shoes and end up on the inside of the shoe, where they are hidden.

Important! In this way, you can lace up shoes while wearing them, which makes it easy to loosen the clamp, but so that the knot on the inside does not put pressure on the foot, it is usually replaced with an outer bow.

The disadvantages of this option include Difficulty in tightening lacing.

“Reverse” lacing provides several options, which depend on the length of the existing laces.
For example, to tie short items, you need to do the following:

• Pass the lace through the fifth pair of holes (counting from the bottom) and bring it inside the shoe.
• Cross the ends and insert the third pair of holes from the outside into the inside (counting from the bottom again).
• Continue lacing both ends at the same time.
• At the bottom of the shoe, pull the ends of the lace vertically through the second pair of holes.
• Cross them over and push them through the remaining holes again, lacing the boot upwards all the way to the end.

Despite the fact that this option holds quite tightly, it is often very uncomfortable for the legs, so many choose a different method of tying.
If your shoes have long ties, then the following instructions may be useful to you.

Important! As in the previous case, you must first pass the lace through the fifth pair of holes inside the shoe (counting from the bottom), and then cross the ends and thread them from the outside into the third pair of holes. We continue lacing both ends, but at the bottom, instead of raising the laces, we cross them and pass them through the second pair of holes from the bottom. This crossing passage of laces must be repeated along all remaining holes.

This method of tying laces does not look very presentable because of the crossing at the bottom, which unsightly runs along the other crossings of the lace.

If you have laces on high boots or even, then they can be decorated with lacing called “butterfly”, especially since the technique of its implementation allows the use of shorter products.

To do this, first of all, find the middle of your segment, then insert both ends into the lower holes, starting them from the outside inward. The marked middle should be in the center of the boot tongue. Now bring the ends of the lace out into the next pair of holes, cross them and thread them into the third pair of holes (again from the outside in).

Did you know? The vertical stretch should always go inside the boot, leaving only beautiful “crosses” on the outside. The boots are laced until the very end, until the holes run out.

With checkerboard lacing, you have the opportunity to create a two-tone checkerboard look right on your sneakers.

• It all starts with preparing two pairs of multi-colored laces, which for maximum effect should be flat and wide enough.
• With one of them (let’s say yellow) we lace the sneakers using the “straight lacing” method, and with the second (for example, blue) we start lacing from the bottom, passing it in a wave-like manner from the bottom and to the very top through the yellow horizontal stripes.
• Now we wrap the blue lace around the yellow one and continue the wavy lacing, but in a downward direction.
• We repeat the procedure until the length of the lace or the space between the two halves is exhausted.
• When finished, tie the ends of the lace (blue) inside the shoes.

This option is only suitable for loose-fitting sneakers, since once the lacing is completed, a certain looseness will form and you will no longer be able to tighten the laces. To improve tightening, it is better to use wide and strong products that can provide sufficient friction between themselves. To increase security, lacing (the "straight" method) in reverse order, so that the weaker stitches are at the bottom of the lacing, and if you do not want it to protrude beyond the shoe, simply do not lace the top holes. Now you know how to tie laces so that they do not come undone and at the same time complement your shoes favorably, and the variety of possible methods will help you choose the most suitable option for each individual case.

Useful tips

A useful new trick will help teach you and your kids how to tie their shoelaces in seconds.

The method is known as " magic fingers" or " Jan's knot" allows you to halve the time it usually takes to tie your shoes or sneakers.

Moreover, the knot does not untie longer. Although the method seems complicated at first, it becomes very simple once you master it.

The knot was invented by Australian Ian Fieggen, who is also called the “Professor of Shoelaces.”

How to tie your shoelaces?

Here the fastest way to tie shoelaces:

1. First tie your shoelaces as usual. Place your little fingers under the laces on both sides.

Then slide your right thumb and index finger under the right lace and your left thumb and index finger over the left lace, using your other fingers to keep the laces taut.

2. This will create two loops, one with the loose end behind and one with the loose end in front. Using your middle finger, push the loose end of the right lace back while your left hand simply rotates to twist the loop through the right one.

3. The next movement crosses two loops. With your left thumb, push the free end toward your right, while your middle right finger pushes the free end between your left thumb and index finger.

4. You need to make sure that you grab the free right end with your left thumb and index finger, and grab the free left end with your right thumb and middle finger.

5. Pass the free ends of the opposite loops through your own loops.

6. Tighten the knot. With practice, you will be able to tie a knot much faster than usual.

How to tie laces on sneakers or sneakers beautifully?