Knitting is a painstaking activity, but interesting and addictive. From threads of different qualities and colors alone, you can create beautiful items of clothing or small elements for decorating them. For example, you can crochet small flowers, which will then be useful in decorating children's things, women's handbags, hats and much more, the main thing is to choose a suitable pattern.

Simple flowers

The simplest petal flower crochet patterns are those in which the flower consists of a central circle and individual petals. These flowers are easy and quick to knit, and their size depends on the selected yarn thickness and hook size. In such flowers, the center is knitted using a chain of chain stitches and a series of double crochets.

All variants of such inflorescences have the same basis and, if desired, can become more complex and modified.

The petals make up the next row after the circular one. In it, the semicircular shape is achieved by making the outer parts of the petals with single crochets, and in the middle with single crochets:

So, you can start with a chain of six air loops and close it into a ring with a half single crochet. The knitting of the first petal will begin with it - two lifting air loops, then a double crochet, which rests on the ring. Then, two more chain stitches to go down and a half double crochet to finish the first petal. The remaining four petals are knitted according to the same pattern. The end of the working thread can be removed to the wrong side by pulling it through the ring.

Petals can be knitted either with support on each column of a circular row, or in one loop using several columns from a row with petals:

In some slightly more complex designs, the row of petals consists of arches of air loops, as shown in the diagram:

By slightly modifying the existing pattern, you can get a completely different flower: by adding teeth on the tops of the petals, their shape changes.

Multilayer products

After mastering simpler flower knitting techniques, you can begin to create more complex flowers. In nature, many flowers have several rows of petals; repeating such an inflorescence is not difficult. A voluminous flower can be made using the previous schemes of single-layer flowers, placing layers one on top of the other.

First, you need to knit a circle - the basis of the future flower - and knit an arch of petals for it, as shown in the first diagram. Knitting the second row, consisting only of petals, again begins from the central circle, exactly above the bottom layer. The second tier should be larger than the previous one by the height of one loop, that is, if three lifting air loops were made in the lower layer to create an arch, then four or five should be made on the next one. In this case, you should focus on the thickness of the thread, which determines the appearance of the knitting and the size of the pattern.

The third and all subsequent rows (no matter how many there are) in such a way that the new loops rest on the first row of loops of the previous row. That is, the “base” of the petal arch in one row is a continuation of the base of such an arch for the next row:

Yarn pansies

Asymmetrical flowers like pansies are no more difficult to knit than simple small flowers. The basis for them is the same - a circle made of a chain of air loops tied with double crochets. The difference is in the knitting of the petals.

Knitting pansies can be divided into three steps. The first of which is the round middle, for which yellow threads are taken. The air loops in the center are tied with connecting posts. Then, a narrow edging is knitted with a lilac or purple thread.

From the upper part of the flower core, two arches of air loops are knitted with purple thread. Next, the petals themselves, consisting of columns with several crochets, will be built onto these loops. In order for the petals to acquire a rounded shape, the outer columns are made with two crochets, and the central ones with three.

The upper part of the inflorescence has light lilac petals. To do this, you need to divide the central yellow circle into three equal sectors, each of which should begin with an arch of air loops. Then, according to the general scheme, petals of a suitable size are built onto these arches, where the outer columns will be shorter than the central ones.

Video on the topic of the article

You can use knitted flowers in any way you like. The advantage of such colors is that they are resistant to moisture - they can be washed, but they retain their shape. They can be easily attached to any material - with threads or glue. Small knitted flowers make beautiful hand-made jewelry, hairpins and decor for clothes, accessories and even complex postcards or photo frames.

With the arrival of spring, you want to decorate your home with delicate spring flowers to breathe into the atmosphere the mood of freshness and the awakening of nature. I offer it as a decoration knit a spring bouquet made of knitted twigs decorated with small knitted flowers, they look like twigs of an apple, cherry or plum tree blooming in spring. This bouquet can also be given to your mother or sister for numerous spring holidays.

To knit a bouquet you will need thin copper wire, cotton “Iris” threads in green, white, pink, blue and yellow, hook number 1.5.

Tie the branches with wire. Cut a thin wire 25-30 cm long and tie it with a green thread; the crocheted twig on the wire will hold the shape you give it well.

Knit 10 single crochets along the wire, then knit a leaf.

For the leaf, cast on a chain of 10 chain stitches, close it into a ring, making a connecting stitch in the 3rd loop.

*Knit a leaf from the formed ring; to do this, insert the hook into the center of the ring and knit 3 tbsp. b/n, 1 half st., 1 tbsp. s/n, 1 tbsp. s/2n, 1 tbsp. s/n, 1 half st., 3 tbsp. b/n. Then tie 3 tbsp on the stem of the leaf. b/n and then knit the next 10 stitches along the wire. b/n.* Repeat from * to* until the end of the wire.

The wire harness can be twisted so that the leaves are placed alternately on different sides of the branch.

Having tied a group of twigs for a bouquet, proceed to knitting flowers according to the pattern.

Knit flowers in any quantity from white, yellow, pink and blue threads.

Description of crochet flower:

Cast on a chain of 5 chain stitches. and close it into a ring with a connecting post.

Knit the 1st row starting with the 1st chain lifting loop, then inserting the hook into the center of the ring, knit 9 sts in a circle, finish the row with a connection. Art. into the lifting loop.

Crocheted flowers are beautiful decorative elements that can decorate a hairpin, a woman's handbag or a summer sundress. There are a great variety of knitting options. This article will help you decide how to crochet flowers. Diagrams and descriptions will help you easily understand this handicraft process. Knitting requires very little - a little yarn, a hook, a detailed description, and even better - a little imagination.

Legend:

St/b/n – single crochet;

St/s/n – double crochet;

V.p. - air loop.

Master class No. 1. Knitting a flower with petals

Crocheted flowers are beautiful products that can be simple or voluminous. In this tutorial we'll look at how to create a simple flower using five triangular petals. By adding the number of loops, you can make the flower more voluminous.

1. We make the first loop, after which we perform 4 ch. We close it into a ring with a connecting loop.
2. We perform a rise, 3 ch, 2 unfinished dc/s/n in the center of the circle, knit together.
3. We make a picot from three air loops.
4. Three air loops and st/s/n, bring everything to the center of the circle. One petal is ready.
5. We do the remaining 4 flowers in the same way.

This is an easy way to make crochet flowers for beginners.

Master class No. 2. Volumetric crochet flower

We perform 4 vp, which are closed in a ring. We knit five arches of three air loops into a ring: a lifting loop, 2 ch, after which we perform 5 treble stitches in the ring. We complete the work with a connecting loop into the first lifting loop. We received 5 arches. Now you need to knit the next row, which consists of small bags, or corn kernels. To do this, we make a st / b / n under the arch, three air loops, under the arch we make five st / s / n. We turn the work, insert the hook into the first dc/s/n and connect. This is how we got the so-called corn grain. Now we make 3 vp, which we connect to the arch. In this way, voluminous crocheted flowers are created.

Now we do the following:

1. Lifting loop, we create an arch from three air loops.
2. We tilt the cone forward a little and connect the loops with the single crochet stitches that we performed earlier.
3. We take the same sequence of actions for the remaining corn grains.
4. The next row is a lifting loop, st/b/n under the arch, 5 air loops.
5. On the arch we create a cone from columns that are knitted with two yarn overs: we will need 5 of them according to the number of grains.
6. We turn the work, insert the hook into the first double crochet stitch and tighten.
7. We perform 5 air loops and fasten into the same arch.

Our original volumetric flower is ready!

Master class No. 3: Flowers with cones in the center

We collect 5 air loops, which we close into a ring. Lifting loop, we make 14 st/b/n into the ring. Crocheting flowers using this method is quite simple. The second row is the bumps. Lifting loop, 4 air loops, 5 tbsp. with two yarn overs in the same loop. We turn the work, then insert a hook into the top of the first column and create a connecting loop - the cone is ready. We fix it on the ring. We skip two columns, insert a hook into the third - this is important, since these two empty columns will be useful to us later. To complete the work, insert the hook into the lifting loop and make a connecting loop. A row of cones is ready.

The third row is the petals. They will be created in place of the two missing columns. We bend the knob, insert a hook into the column and make a st/b/n stitch. Now you need to create 4 vp, at the same point - two double crochets, 2 tbsp. with double crochets we perform it in the adjacent free column. In the same column we make 4 air loops and dc. We've got the first petal. We do the rest in place of the missing columns. The row is completed by inserting the hook into the first single crochet, after which we connect the loops. The flower is ready!

Master class No. 4: Knitting the simplest flowers

To do this, we need to knit 5 air loops that close into a ring. One lifting loop and 4 air loops. Make 3 tbsp. with three yarn overs in a ring. We make 4 ch. and fix them to the base. Our first petal is ready. By analogy, we create several more petals. If you are looking for how to crochet a flower in the easiest way, then this option is exactly right for you. The following version of simple knitting involves the following stages:

• 5 air loops are closed into a ring;
• 3 lifting air loops;
• arch of three air loops;
• perform three st/s/n;
• 3 air loops;
• perform three st/s/n;
• a total of 6 petals are made.

This was the first row. The second row is the petals. We make three air loops, under the arch we knit a half-column and 5 treble stitches, 1 half-column and treble stitch. This is how we created the first petal. In the same way we create the remaining petals. We will get a neat and dense flower, the center of which can be decorated with a bead.

The third option is small crocheted flowers, for which patterns are not needed. We create 5 air loops and create a ring based on them. Now we knit one air loop, connect the loops with a ring, and perform 9 st/b/n. We complete the row by connecting to the center. The second row is petals: 1 air loop for lifting, in the column in the previous row we knit 5 tbsp. with 2 yarn overs. We fasten the petal with a single crochet. In the same way we create four more petals.

Master class No. 5: Flowers for openwork lace

5 air loops are closed in a circle. We make one loop for lifting and into the ring - 9 dc. We complete the row with a connecting post in the first lifting loop. Second row: one lifting loop, 4 air loops, 1 tbsp. with three yarn overs in the same base loop. On the next post we knit 3 tbsp. with three double crochets, repeat this with the adjacent stitch. We knit 4 air loops and fasten them into the same loop. This is how we created the first petal. The remaining petals are created in the same way. We make 4 air loops and attach them to the lifting loop. These crocheted flowers allow you to create a whole fabric that looks like lace.

Master class No. 6: Knitting a daisy with a voluminous center

1. We close 3 air loops into a ring.
2. Lifting loop, 2 air loops are secured in a ring with a single crochet. The result is an arch - we only need 5 of these.
3. Next row - under the arch we make a double crochet stitch, 4 chain stitches, and under the same arch we knit three double crochets with a common top. There should be one loop left from the column. There are 4 loops left on the hook that are knitted together. 4 air loops, secure them with a single crochet under the arch. Repeat throughout the entire row.
4. We perform a lifting loop, three air loops that form an arch. We insert the hook into the single crochet of the previous row and create a single crochet again. 3 chain stitches, 2 single stitches. To make it more convenient to work, you should tilt the petals a little - this will make it easier to work.
5. The next row is the petals of the central part. We perform lifting, 4 air loops, 3 tbsp. with two yarn overs with a common top. We knit all the columns together. Under the arch we knit 1 double crochet stitch, 4 chain stitches and under the arch we again knit three double crochets with a common top. Thus, we created the central part of our future flower. By the way, these crocheted flowers are suitable for decorating hats.
6. To create the next row we need a contrasting thread, take a white one. First, we attach it to the yellow thread, cast on three air loops, and fasten them with a single crochet. We bend the petal, make two stitches, cast on 3 air loops, and again stitch for fastening. The row of white arches is completed.
7. We have received the arches that we need to knit the last row of petals: one lifting loop, 5 chain loops, under the arch we create 4 stitches with three crochets - they remain unfinished. We create five such columns, after which we connect the remaining yarn overs. Again 5 vp, which we attach to the arch, knitting 2 st/b/n.

For greater beauty, the flower can be decorated with a trim. To do this, perform one more row: under the arch we make 3 chain stitches, 3 double stitches, one half-column, three double stitches - all under one arch. We create three dc/s/n at the top of the knitted stitches. We also knit another stitch here - the top is ready. Now we create an arch - 4 dc/s/n, half-column, 3 dc/s/n. Thus, we prepare the binding of the first petal. It turns out to be a beautiful flower, all that remains is to tie the remaining petals. Our decorative element will immediately become brighter and more beautiful.

Master class No. 7: Knitting a double-sided flower

We collect 8 air loops and close them into a ring. Now we create 3 air loops, dc/s/n, picot from 11 air loops - this will become the basis of our petal. We knit another dc/s/n, and another one - above it we make 11 air loops for picot. Crochet flower patterns are quite simple, and even a beginner can handle this process. We knit two dc/s/n, and above the third we create a picot - there should be 6 of them. This completes the first row. Second row: 1 chain stitch, we tie all 11 loops of our picot using a double crochet, we knit three treble crochets at the top of the flower. We attach the petal to the adjacent column. In this way we tie all the petals.

Third row: tying the petals with yarn of a different color. First, we create an air loop, in the next column we knit a half-column, in the next - 1 half-column and 1 dc/s/n, then - 1 dc/s/n and so on until the end. The top of the petal will be higher, so here we knit 3 single stitches. When we reach the bottom of the flower, we do the following: we pull the loop through the base of the flower, grab the working thread and pull it out, but do not tighten it. We knit a neat loop. We tie the remaining petals in the same way.

Master class No. 8: Flowers from individual petals

As always, we make 5 air loops and close them into a ring. We perform 4 air loops and 4 more air loops, after which we create 1 tbsp. with double yarn overs, create a circle. We turn the work over and perform an air loop under the arch, then 1 double stitch, then a picot of three chain loops, a half column and another picot of three loops. We turn the work again, perform 5 st/s/n on the front side. We secure the first petal and attach it to the base with a connecting loop.

Now we create 4 air loops, knit 1 tbsp. with two yarn overs - they will become the basis for the second petal. These crocheted flowers look very airy and beautiful. The master class will help you create such beauty. Individual flowers can be created from threads of different colors to make the final composition bright and beautiful.